Stainless steel Products

Finish Type
Finish Type

Finish Type

Features

Finish

Thickness

Description

No. 1

3.0mm ~50.0mm

Surface finished by hot-rolling, annealing and pickling, characterized by white pickled surface.

2D

0.3mm ~ 3.0mm

A No. 1 Finish after being cold rolled, annealed, pickled and passivated. This results in a uniform dull matte finish, superior to a No. 1 Finish

2B

0.25mm ~10.0mm

Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be brighter.

BA
(Bright Annealed)

0.25mm ~3.0mm

Processed with bright heat treatment after cold rolled.

No.3

0.4mm ~ 3.0mm

This is a ground unidirectional uniform finish obtained with 80–100 grit abrasive.

No. 4

0.4mm ~3.0mm

Polished with No. 150 to No.180 grit abrasive. It is not highly reflective, but is a good general purpose finish on components which will suffer fairly rough handling in service.

HL (Hair Line)

0.4mm ~3.0mm

Finished by continuous polishing streaks by using abrasive of suitable grain size.The streak is neat like hair. so it's called" Hair Line". Our streak is much neat.

No.8 (Mirror)

0.5mm ~2.0mm

Produced by progressively using finer and finer abrasives and finishing with buffing compounds. The final surface is blemish free with a high degree of image clarity, and is the true mirror finish.

Remarket:
* Both sides finish available
* Paper interleave available
* PVC / Laser PE coating & printing
Loading...